Cisco Aironet wireless AIR-AP1832I-H-K9 Series Access Point

Cisco Aironet wireless AIR-AP1832I-H-K9 Series Access Point

  • Cung cấp thiết bị Cisco Aironet wireless AIR-AP1832I-H-K9 Series Access Point.
  • Controller-based 802.11a/g/n/ac configurable Mobility Express.
  • Hàng chính hãng 100%, bảo hành 12 tháng.

  • Mô tả

Mô tả

Mô tả tổng quan Cisco Aironet wireless AIR-AP1832I-H-K9 Series Access Point

Cisco Aironet wireless AIR-AP1832I-H-K9 Series Access Point

Cisco Aironet wireless AIR-AP1832I-H-K9 Series Access Point

Integrated antennas–  2.4 GHz, gain 3 dBi, internal omni, horizontal beamwidth 360°

–  5 GHz, gain 5 dBi, internal omni, horizontal beamwidth 360°

Interfaces–  1 x 10/100/1000BASE-T autosensing (RJ-45), Power over Ethernet (PoE)

–  Management console port (RJ-45)

–  USB 2.0 (enabled via future software)

Indicators–  Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors
Dimensions (W x L x H)–  Access point (without mounting bracket): 8.3 x 8.3 x 2 in. (210.8 x 210.8 x 50.8 mm)
Weight–  3.12 lb (1.41 kg)
EnvironmentalCisco Aironet 1830i

–  Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)

–  Nonoperating (storage) altitude test: 25˚C, 15,000 ft.

–  Operating temperature: 32° to 104°F (0° to 40°C)

–  Operating humidity: 10% to 90% (noncondensing)

–  Operating altitude test: 40˚C, 9843 ft.

System–  1 GB DRAM

–  256 MB flash

Powering options–  AP1830: 44 to 57 VDC

–  Power supply and power injector: 100 to 240 VAC; 50 to 60 Hz

–  802.3af/802.3at

–  Enhanced PoE

–  Cisco local power supply, AIR-PWR-C=

–  Cisco power injector, AIR-PWRINJ5= (Note: This injector supports 802.3af only), AIR-PWRINJ6=

Note: If 802.3af PoE is the source of power, the USB port is disabled.

Power draw–  15.4W

Note: When deployed using a PoE specification, the power drawn from the power sourcing equipment will be higher by some amount, depending on the length of the interconnecting cable.

Physical security–  Torx security screw, included with the access point
Accessories–  Mounting bracket: AIR-AP-BRACKET-8= (available as spare)

–  Physical security kit: AIR-SEC-50= (sold separately), with 50 pcs. security screws used to secure the access point onto wall-mounting bracket, 50 pcs. RJ-45 caps and 2 pcs. unlock keys used to block physical access to Ethernet ports

Compliance–  Safety: UL 60950-1, CAN/CSA-C22.2 No. 60950-1, UL 2043, IEC 60950-1, EN 60950-1

–  Radio approvals: FCC Part 15.247, 15.407, RSS-247 (Canada), EN 300.328, EN 301.893 (Europe), ARIB-STD 66 (Japan), ARIB-STD T71 (Japan), EMI and susceptibility (Class B), FCC Part 15.107 and 15.109, ICES-003 (Canada), VCCI (Japan), EN 301.489-1 and -17 (Europe), EN 50385

–  IEEE standards: IEEE 802.11a/b/g, 802.11n, 802.11h, 802.11d, IEEE 802.11ac

–  Security: 802.11i, WPA2, WPA, 802.1X, AES

–  Extensible Authentication Protocol (EAP) types: EAP-Transport Layer Security (TLS), EAP-Tunneled TLS (TTLS) or Microsoft Challenge Handshake Authentication Protocol Version 2 (MSCHAPv2), Protected EAP (PEAP) v0 or EAP-MSCHAPv2, EAP-Flexible Authentication via Secure Tunneling (FAST), PEAP v1 or EAP-Generic Token Card (GTC), EAP-Subscriber Identity Module (SIM)

–  Multimedia: Wi-Fi Multimedia (WMM)

–  Other: FCC Bulletin OET-65C, RSS-102

SoftwareCisco Unified Wireless Network Software Release with AireOS wireless controllers:

–  8.1.121.0 or later for the Cisco Aironet 1830 Series Access Points

Deployment modesCentralized, standalone, sniffer**, Cisco FlexConnect, monitor**, OfficeExtend**, mesh**
Supported wireless LAN controllers–  Cisco 2500 Series Wireless Controllers, Cisco Wireless Controller Module for ISR G2, Cisco Wireless Services Module 2 (WiSM2) for Cisco Catalyst® 6500 Series Switches, Cisco 5500 Series Wireless Controllers, Cisco 5520 Series Wireless Controllers, Cisco Flex® 7500 Series Wireless Controllers, Cisco 8500 Series Wireless Controllers, Cisco 8540 Series Wireless Controllers, Cisco 5760 Wireless LAN Controller,** Cisco Catalyst 3650 and 3850 Series Switches with integrated controller**

–  Cisco Mobility Express

802.11n version 2.0 (and related) capabilities–  3×3 MIMO with two spatial streams

–  Maximal ratio combining (MRC)

–  20- and 40-MHz channels

–  PHY data rates up to 300 Mbps (40 MHz with 5 GHz)

–  Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)

–  802.11 dynamic frequency selection (DFS)

–  Cyclic shift diversity (CSD) support

802.11ac Wave 1 and 2 capabilities–  3×3 MIMO with two spatial streams, single-user or multiuser MIMO

–  MRC

–  802.11ac beamforming (transmit beamforming)

–  20-, 40-, and 80-MHz channels

–  PHY data rates up to 867 Mbps (80 MHz in 5 GHz)

–  Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)

–  802.11 DFS

–  CSD support

____Uy tín – Chất lượng_____

CÔNG TY TNHH THƯƠNG MẠI DỊCH VỤ NÉT VIỆT PRO

Địa chỉ: : 447/23 Bình Trị Đông, khu phố 5, phường Bình Trị Đông A, quận Bình Tân, Tp. Hồ Chí Minh

MST: 0314542250

Tel: [028] 22 535 496

Kinh doanh –  Hotline: 0902.966.449 – 0962.241.608

Mail: kinhdoanh@ciscoshop.vn –  pronetviet@gmail.com

Skype: netvietpro.com

Website : www.netvietpro.comwww.ciscoshop.vnwww.phukienquang.com.vn